Publishing House “Akademperiodyka”

National Academy of Sciences of Ukraine

Books Scientific monographs Ukrainian scientific book in a foreign language

Fluid dynamic design of turbomachine elements

Author: Kalinkevych Mykola

Institute of Applied Physics of the NAS of Ukraine

Reviewers:
Academician of the NAS of Ukraine A.V. RUSANOV, Doctor of Sciences, Professor, Director of the A. Pidhornyi Institute of Mechanical Engineering Problems of the NAS of Ukraine
Professor M.G. KHMELNYUK, Doctor of Sciences, Head of the department of refrigeration machines, installations and air conditioning of the Odessa National Technological University;
Professor S.I. SERBIN, Doctor of Sciences, Director of the Machinebuilding Institute of the National University of Shipbuilding named after Admiral Makarov

Year: 2023
Pages: 148
ISBN: 978-966-360-481-7
Publication Language: English
Publisher: PH “Akademperiodyka”
Place Published: Kyiv
DOI: https://doi.org/10.15407/akademperiodyka.481.148

The monograph presents the theoretical foundations of design and research results of impellers, diffusers, and return channels of centrifugal compressors, discusses the basic principles of modeling viscous spatial fluid flows, and given the main equations used to perform gasdynamic calculations of turbomachines. Original methods of designing elements of the flow parts of turbomachines are presented, which ensure an increase in the efficiency of these machines. The results of numerical and experimental studies of gas flow in the flow parts of centrifugal compressors are given. The information provided in the monograph has a high scientific level and is of practical interest.
The monograph is intended for scientists, engineers engaged in the research and design of centrifugal compressors, as well as for graduate students.

You can ordering book in SA “UKRINFORMNAUKA”

REFERENCES:

  1. Abdelwahab A., Gerber G.A. New Three-Dimensional Aerofoil Diffuser for Centrifugal Compressors. Proceedings of Inst. Mech. Eng. Part A. 2008. pp. 819—830. https://doi.org/10.1243/09576509JPE579
  2. Abramovich G.N. Teorija turbulentnyh struj. Moscow: Fizmatgiz, 1984. 715 p. [in Russian].
  3. Abramovich G.N. Prikladnaja gazovaja dinamika. Moscow: Nauka, 1991. 600 p. [in Russian].
  4. Akul’shin Ju.D., Izmajlov R.A., Kononov S.V. Vrashhajushhijsja sryv v stupeni centrobezhnogo kompressora s bezlopatochnym diffuzorom. Kompressornaja tehnika i pnevmatika. 1994. No. 4. pp. 23—26 [in Russian].
  5. Albertson M.L. et al. Diffusion of submerged jets. Proceedings of the ASCE. 1948. Vol. 74. P. 1751.
  6. Allan W.K. The continuously critical turbulent boundary layer. Royal Military College of Science. Shrivenham, 1962. pp. 251—261. https://doi.org/10.1017/S0022112063000215
  7. Anderson L.R., Heiser W.H., Jackson J.C. Axisymmetric One-Dimensional Compressible Flow. Theory and Applications. ASME J. Applied Mechanics. 1970. pp. 917—923. https://doi.org/10.1115/1.3408718
  8. Anisimov S.A. et al. Issledovanie lopatochnogo diffuzora vysokonapornoj centrobezhnoj stupeni. Issledovanie v oblasti kompressornyh mashin. 1974. Vol. 4. pp. 176—181 [in Russian].
  9. Anisimov S.A., Sherstjukov V.A. et al. Issledovanie dvuhjarusnyh lopatochnyh diffuzorov centrobezhnogo kompressora. Izv.vuzov. Jenergetika. 1978. No. 4. pp. 62—67 [in Russian].
  10. Apanasenko A.I. Rabochie kolesa oseradialnogo tipa dlja centrobezhnyh kompressorov. Obzornaja informacija. Ser. XM. 1984. Vol. 5. CINTIHIMNEFTEMASh. 51 p. [in Russian].
  11. Baghdadi S., McDonald A.T. Performance of three vaned diffusers with swirling flow. ASME J. of Fluids Engineering. 1975. Vol. 97. https://doi.org/10.1115/1.3447238
  12. Baldwin B.S., Lomax H. Thin-Layer Approximation and algebraic Model for Separated Turbulent Flows. 1978. AIAA Paper 78—257. Huntsville, AL.
  13. Bal’e O.E. Issledovanie techenija i poter v centrobezhnyh kompressorah. Trudy ASME. Ser. A. Ch. 1—2. 1970. No. 3 [in Russian].
  14. Bam-Zelikovich G.M. Raschet otryva pogranichnogo sloja. Izv. AN SSSR. OTN. 1954. No. 12. pp. 68—85 [in Russian]. https://doi.org/10.2514/6.1978-257
  15. Belov I.A., Isaev S.A. Modelirovanie turbulentnyh techenij. St. Petersburg: Balt. gos. tehn. University. 2001. 108 p. [in Russian].
  16. Benini E. Optimal Naviera Stokes Design of Compressor Impellers Using Evolutionary Computation. Int. J. Comput. Fluid Dyn. 2003. 17. pp. 357—369. https://doi.org/10.1080/1061856031000099821
  1. Bisping J., Rossbach T., Grates D., Hildebrandt A., Jeschke P. Influence of Diffuser Diameter Ratio on the Performance of a Return Channel Within A Centrifugal Compressor Stage. Proceedings of the GPPS Forum 18 Global Power and Propulsion Society. Montreal, ON, Canada. 2018.
  1. Brasz J.J. Secondary Flow in Return Channels and Its Effect on Multistage Compressor Performance. Int. Compressor Engineering Conf. Paper 1998. 1340. 19.
  1. Bychkova L.A. Jeksperimentalnoe issledovanie diffuzornyh kanalov s predotryvnym turbulentnym techeniem. Uchen. zap. CAGI. 1970. Vol. 1. No. 5. pp. 89—93 [in Russian].
  1. Casartelli E., Saxer A.P., Gyarmathy G. Numerical Flow Analysis in a Subsonic Vaned Radial Diffuser With Leading Edge Redesign. ASME, J.Turbomachinery. 1999. Vol.121. No.1. pp. 119—126. https://doi.org/10.1115/1.2841219
  2. Casey M., Gersbach F. An Optimization Technique for Radial Compressor Impellers. Proceedings of ASME. 2008. Turbo Expo. GT2008-50561.
  1. Chernjavskij L.K., Gordeev N.N. Raschetnaja optimizacija lopatochnoj reshetki obratnogo napravljajushhego apparata centrobezhnogo kompressora. Jenergomashinostroenie. 1969. No. 5 [in Russian].
  2. Cho S.Y., Ahn K.Y., Lee Y.D., Kim Y.C. Optimal Design of a Centrifugal Compressor Impeller Using Evolutionary Algorithms. Math. Prob. Eng. 2012. pp. 1094—1099.
  1. Chuang Gao Chuangang G., Tong Wang Xinwei Shu. Multi-objective optimization of a 3D vaneless diffuser based on fuzzy theory. Front. Energy Power Eng. China. 2008. Vol. 2(1). pp. 66—70. https://doi.org/10.1007/s11708-008-0006-5
  2. Chzhen P. Upravlenie otryvom potoka. Moscow: Mir, 1979. 552 p. [in Russian].
  3. Chzhen P. Otryvnye techenija. Moscow: Mir. 1972. 300 p. [in Russian].
  4. Citavi. Dvumernye kompressornye reshetki s optimalnym raspredeleniem skorosti na poverhnosti lopatok. Tr. AOIM. Ser. A. 1975. No. 1 [in Russian].
  5. Dean R.C., Senoo Y. Rotating wakes in vaneless diffusers. J. of Basic Engineering. 1960. Vol. 82. pp. 563—570. https://doi.org/10.1115/1.3662659
  6. De Bellis F., Guidotti E., Rubino D.T. Centrifugal compressors return channel optimization by means of advanced 3D CFD. Proceedings of the Turbine Technical Conf. and Exposition GT2015. Montreal, QC, Canada. 2015.
  1. Dejch M.E. Tehnicheskaja gazodinamika. Moscow—Leningrad: Gosjenergoizdat, 1961. 671 p. [in Russian].
  2. Den G.N. Turbulentnyj pogranichnyj sloj na stenke bezlopatochnogo diffuzora centrobezhnoj kompressornoj mashiny. Izv. vuzov. Jenergetika. 1961. No. 5. pp. 89—96 [in Russian].
  1. Den G.N. Issledovanie raboty bezlopatochnyh diffuzorov s neparallelnymi stenkami. Teplojenergetika. 1965. No. 6. pp. 21—24.
  2. Den G.N. O rabote obratnyh napravljajushhih apparatov CCM. Jenergomashinostroenie. 1968. No. 9. pp. 32—35 [in Russian].
  3. Den G.N. Mehanika potoka v centrobezhnyh kompressorah. Leningrad: Mashinostroenie, 1973. 272 p. [in Russian].
  4. Den G.N. Proektirovanie protochnoj chasti centrobezhnyh kompressorov. Leningrad: Mashinostroenie, 1980. 232 p. [in Russian].
  1. Dixon S.L., Hall S.A. Fluid Mechanics and Thermodynamics of Turbomachinery. Sixth edition, Elsevier Inc. 2010. 459 p.
  2. Dorfman L.A. Chislennye metody v gazodinamike turbomashin. Leningrad: Jenergija. 1974. 272 p. [in Russian].
  3. Dovzhenko V.N., Seleznev K.P. Issledovanie centrobezhnyh stupenej s peremennoj geometriej protochnoj chasti. Tezisy dokladov pjatoj vsesojuznoj nauchno-teh. konf. po kompressorostroeniju. Moscow: MVTU, 1977. pp. 35—38 [in Russian].
  4. Drozdov A., Rekstin A. Analysis of the velocity diagrams of impellers of centrifugal compressor stages after the preliminary design. Proceedings of the MATECWeb of Conf. St. Petersburg, Russia. 2018. Vol. 245. p. 04004 [in Russian]. https://doi.org/10.1051/matecconf/201824504004
  5. Druzhinskij I.A. Slozhnye poverhnosti. Matematicheskoe opisanie i tehnologicheskoe obespechenie. Leningrad: Mashinostroenie,1985. 263 p. [in Russian].
  6. Dubitsky O., Japikse D. Vaneless Diffuser Advanced model. ASME J. of Turbomachinery. Vol. 130 (1), 011020.
  7. Eckert B. Osevye i centrobezhnye kompressory. Moscow: Mashgiz, 1959. 679 p. [in Russian].
  8. Engeda A. The Design and Performance Results of Simple Flat Plate Low Solidity Vaned Diffusers. Proceedings Inst. Mech. Eng. Part A. 2001. pp. 109—118. https://doi.org/10.1243/0957650011536471
  9. Evdokimov V.E., Reprincev A.I. O sovershenstvovanii obratnogo napravljajushhego apparata. Jenergomashinostroenie. 1984. No. 10. pp. 2—5 [in Russian].
  10. Evdokimov V.E. Bank jeksperimentalnyh dannyh po modeljam stupenej i ih jelementam dlja proektirovanija CKM. Turbiny i kompressory. 1997. No. 3. pp. 12—20 [in Russian].
  1. Evgen’ev S.S., Zvanec B.A., Cukerman S.V. Vlijanie vzaimnogo polozhenija rabochego kolesa i lopatochnogo diffuzora na harakteristiki centrobezhnoj kompressornoj stupeni. Himicheskoe i neftjanoe mashinostroenie. 1975. No. 8. pp. 7—24 [in Russian].
  1. Eynon P., Whitfield A. Effect of Low Solidity Vaned Diffusers on the Performance of a Turbocharger Compressor. Proceedings Inst. Mech. Eng. Part C. pp. 325—339. https://doi.org/10.1243/0954406971522088
  2. Fedjaevskij K.K., Ginevskij A.S., Kolesnikov A.V. Raschjot turbulentnogo pogranichnogo sloja neszhimaemoj zhidkosti. Leningrad: Sudostroenie, 1973. 256 p. [in Russian].
  1. Galerkin Yu.B., Nuzhdin A.S., Seleznev K.P. Vlijanie formy profilja bezlopatochnogo diffuzora na jeffektivnost raboty centrobezhnoj stupeni. Issledovanija v oblasti kompressornyh mashin. Kyiv: Izd-vo AN USSR, 1970. pp. 202—214 [in Russian].
  1. Galerkin Yu.B. et al. Rezultaty rascheta vjazkogo potoka v nepodvizhnyh jelementah centrobezhnyh kompressornyh stupenej s pomoshh’ju programmnoj sistemy ANSYS/CFX. Kompressornaja tehnika i pnevmatika. 2007. No. 2. pp. 10—16 [in Russian].
  1. Galerkin Yu.B., Gamburger D.M., Epifanov A.A. Analiz techenija v centrobezhnyh stupenjah metodami vychislitelnoj gidrogazodinamiki. Kompressornaja tehnika I pnevmatika. 2009. No. 3. pp. 22—32 [in Russian].
  1. Galerkin Yu.B. Turbokompressory. Rabochij process, raschet i proektirovanie protochnoj chasti. Moscow: Informacionno-izdatelskij centr ≪KHT≫, 2010. 596 p. [in Russian].
  1. Galerkin Yu., Reksrin A., Drozdov. A. 2D and 3D impellers of centrifugal compressors — advantages, shortcomings and fields of application. IOP Conf. Ser. Materials Sci. and Engineering. 232(1). 2017.
  1. Galerkin Yu.B., Rekstin A.F., Marenina L.N., Soldatova K.V. Creation of parametrized model of return channel flow path for CFD-researches. Proceedings of the Technique and technology of Petrochemical and Oil and Gas Production. Materials of the 10th Int. Sci. and Technical Conf. Omsk, Russia, Publishing House of OmGTU, 2020. pp. 127—128.
  1. Garbaruk A.V., Lapin Ju.V., Strelec M.H. Prostaja algebraicheskaja model turbulentnosti dlja rascheta turbulentnogo pogranichnogo sloja s polozhitelnym perepadom davlenija. Nauchno-tehnicheskie vedomosti. St. Petersburg: SGPU, 1999. No. 1. pp. 82—86 [in Russian].
  1. Gavrichenko I.V., Kalinkevich M.V. Proektirovanie oseradialnyh kanalov turbomashin. Kompressornoe i jenergeticheskoe mashinostroenie. 2008. No. 1(11). pp. 42—49 [in Russian].
  1. Gidromehanika. Leningrad: Sudostroenie, 1968. 568 p. [in Russian].
  2. Ginevskij A.C., Bychkova A.A. Ajerodinamicheskie harakteristiki ploskih i osesimmetrichnyh diffuzorov s predotryvnym sostojaniem pogranichnogo sloja Sb. Teplomassoperenos. 1968. Vol. 1. pp. 100—109 [in Russian].
  3. Ginevskij A.S. Teorija turbulentnyh struj i sledov. Moscow: Mashinostroenie, 1969. 400 p. [in Russian].
  4. Goldschmied F.R. An Approach to Turbulent Incompressible Separation under Adverse Pressure Gradients. J. Aircraft. 1965. Vol. 2. No. 2. pp. 108—115. https://doi.org/10.2514/3.43626
  1. Gostelou Dj. Ajerodinamika reshetok turbomashin. Moscow: Mir, 1987. 391 p. [in Russian].
  2. Greitzer E.M., Tan C.S., Graf M.B. Internal Flow. Concepts and Applications. Cambridge University Press, 2004. 707 p. https://doi.org/10.2979/VIC.2004.46.4.707
  1. Hackeschmidt M., Vogelsang E. Uber den Entwurf spezieller Rotationssymmetrischer, gerader Grenzleislungsdiffusoren, Wissen-schaftliche Zeitschrift der Technischen Universitat Dresden. 1966. Vol. 15. No. 1.
  1. Hildebrandt A. Aerodynamic Optimization of a Centrifugal Compressor Return Channel and U-Turn With Genetic Algorithms. Proceedings of ASME. Turbo Expo 2011. Vancouver, Canada. 2011. ASME Paper No. GT2011-45076.
  2. Hildebrandt A. Numerical analysis of overall performance and flow phenomena of an automatically optimized treedimensional return channel system for multistage centrifugal compression systems. ASME Turbo Expo 2012. ASME Paper GT2012-68559. ASME, New York, USA. https://doi.org/10.1115/GT2012-68559
  3. Ho Shuan. Optimizacija dlja szhimaemyh potokov, osnovannaja na koncepcii pogranichnogo sloja. Tr. AOIM. Ser. A. 1975. No. 2 [in Russian].
  1. Ibaraki Seiichi, Tetsuya Matsuo, Takao Yokoyama. Investigation of Unsteady Flow Field in a Vaned Diffuser of a Transonic Centrifugal Compressor. J. Turbomachinery. 2007. Vol. 129. No 4. pp. 686—693. https://doi.org/10.1115/1.2720505
  2. Idel’chik I.E. Spravochnik po gidravlicheskim soprotivlenijam. 3-e izd. Moscow: Mashinostroenie, 1992. 672 p. [in Russian].
  1. Ignatenko V.M., Kalinkevich M.V. Analiz metodov opredelenija termodinamicheskih svojstv mnogokomponentnyh gazovyh smesej. Kompressornoe i jenergeticheskoe mashinostroenie. 2006. No. 3(5). pp. 82—87 [in Russian].
  2. Inoue M., Cumpsty N.A. Experimental study of centrifugal impeller discharge flow in vaneless and vaned diffusers. ASME J. of Engineering for Gas Turbines and Power. 1984. Vol. 106. pp. 455—467. https://doi.org/10.1115/1.3239588
  3. Izmajlov P.A. Nestacionarnye processy v centrobezhnom kompressore. Tr. nauchn. shk. Kompressorostroenija. St. Petersburg: NPK SPbGTU, 2000. pp. 362—369 [in Russian].
  1. Jaatinen-Varri A., Roytta P., Turunen-Saaresti T., Gronman A. Experimental study of centrifugal compressor vaneless diffuser width. J. of Mechanical Sci. and Technology. 2013. Vol. 27. No. 4. pp. 1011—1020. https://doi.org/10.1007/s12206-013-0122-y
  1. Jansen W. Quasi-unsteady flow in a radial vaneless diffuser. Cambridge: Mass. 1960. 121 р.
  2. Jansen W. Rotating Stall in a Radial Vaneless Diffuser. J. Basic Eng. 1964. Vol. 86. pp. 750—758. https://doi.org/10.1115/1.3655945
  3. Jansen W., Kirschner A.M. Impeller Blade Design Method for Centrifugal Compressors. Fluid Mech. Acoust. Des. Turbomach. 1974. SP-304. pp. 537—563.
  1. Japikse D. Centrifugal Compressor Design and Performance. 1996. Concepts ETI, Inc., Wilder, VT.
  2. Jariwala V., Larosiliere L., Hardin J. Design Exploration of a Return Channel for Multistage Centrifugal Compressors. Proceedings of the ASME. Turbo Expo 2016. Turbomachinery Technical Conference and Exposition GT2016, Seoul, Korea, Energies, 13.
  1. Johnston J.P. Boundary Layers in Internal Flow — Performance Prediction, in Advanced Topics in Turbomachinery Technology. Japikse D. (ed.). 1986. Concepts ETI Press, Wilder, VT.
  1. Johnston J.P. Diffuser Design and Performance Analysis by Unified Integral Methods, AIAA Paper 97-2733. 1997. American Institute of Aeronautics and Astronautics, Washington, DC. https://doi.org/10.2514/6.1997-2733
  2. Jun A.A., Krylov B.A. Raschet i modelirovanie turbulentnyh techenij s teploobmenom, smesheniem, himicheskimi reakcijami i dvuhfaznyh techenij v programmnom komplekse Fastest-3D. Moscow: MAI. 2007. 116 p. [in Russian].
  1. Jun A.A. Teorija i praktika modelirovanija turbulentnіh techenij. Moscow, URSS. 2009. 273 p. [in Russian].
  2. Kalashnikov A.N., Kalinkevych M.V. K voprosu o proektirovanii obratno-napravljajushhih apparatov centrobezhnyh kompressorov. Vestnik NTUU ≪KPI≫. Mashinostroenie. 2002. Vyp. 42. T. 2. pp. 158—160[in Russian].
  1. Kalashnіkov A.M., Kalіnkevych M.V. Raschet neizojentalpijnogo techenija gaza v obratno-napravljajushhih apparatah centrobezhnyh kompressorov. Vіsn. Shіdnoukrainskogo nacіonalnogo unіversitetu іmenі Volodimira Dalia. Lugansk, 2007. No. 3(109). Ch. 1. pp. 109—113 [in Russian].
  2. Kalashnіkov A.M., Kalіnkevych M.V. Doslіdzhennja termogazodinamіchnih procesіv u zvorotno-naprjamnih aparatah vіdcentrovih kompresorіv. Kompressornoe i jenergeticheskoe mashinostroenie. 2007. No. 4(10). pp. 87—94 [in Ukrainian].
  3. Kalashnikov A.N., Kalinkevych M.V. Issledovanie termogazodinamicheskih processov v obratnyh napravljajushhih apparatah centrobezhnogo kompressora. Kompressornaja tehnika i pnevmatika. Moscow: ≪KHT≫, 2008 No. 2. pp. 31—36 [in Russian].
  4. Kalinkevych M.V., Savin B.N., Simonov A.M. Razrabotka lopatochnyh jelementov oseradialnyh stupenej malorashodnogo centrobezhnogo kompressora po zadavaemomu raspredeleniju skorostej. Trudy LPI. 1976. No. 358. pp. 63—68 [in Russian].
  1. Kalinkevych M.V., Bobrov A.N. O reshenii obratnoj zadachi gazodinamiki pri proektirovanii lopatochnyh diffuzorov centrobezhnyh kompressorov. Vestnik nacionalnogo tehnicheskogo universiteta Ukrainy ≪Kievskij politehnicheskij institut≫. Mashinostroenie. 1999. Vyp. 36. T. 1. Kyiv: NTU Ukrainy ≪Kievskij politehnicheskij institut≫. pp. 152—155 [in Russian].
  1. Kalinkevych M.V., Bobrov A.N., Kalashnikov A.N. Povyshenie jekonomichnosti centrobezhnyh kompressorov za schet uluchshenija gazodinamicheskih harakteristik nepodvizhnyh jelementov stupeni. Vіsn. Sumskogo derzhavnogo unіversitetu. Ser. Tehnіchnі nauki (Mashinobuduvannja). 2002. No. 9(42). pp. 34—39 [in Russian].
  1. Kalinkevych M.V., Bobrov A.N., Kalashnikov A.N. Proektirovanie nepodvizhnyh jelementov stupeni centrobezhnogo kompressora s uluchshennymi gazodinamicheskimi harakteristikami. Kompressornaja tehnika i pnevmatika v XXI veke. XIIV Mezhdunarodnaja nauchno-tehnicheskaja konf. po kompressorostroeniju. Sumy: SumGU, 2004. pp. 197—200 [in Russian].
  1. Kalinkevych M.V., Bobrov A.N., Mihajlova Ju.Ju. (2004). Programmnoe obespechenie pojelementnogo rascheta gazodinamicheskih harakteristik centrobezhnogo kompressora. Kompressornaja tehnika i pnevmatika v XXI veke. XIII Mezhdunarodnaja nauchno-tehnicheskaja konf. po kompressorostroenij. Sumy: SumGU, 2004. pp. 190—197[in Russian].
  1. Kalіnkevych M. Variantnyj raschet centrobezhnogo kompressora. Sumy: SumDU, 2008. 55 p. [in Russian].
  2. Kalіnkevych M.V., Gavrichenko І.V. Proektuvannja oseradіalnih kanalіv turbomashin. Sumy: SumDU, 2008. 161 p. [in Ukrainian].
  3. Kalinkevych M., Kalashnikov А., Ignatenko V., Hontar O. Research on return channels of centrifugal compressors. Inst. of Mechanical Engineers (IMechE). Int. Conf. on Compressors and their Systems. City University London, UK. Woodhead Publishing. 2009. pp. 217—226.
  4. Kalinkevych M.V. et al. Metodika proektirovanija lopatochnyh diffuzorov centrobezhnyh kompressorov po zadavaemomu raspredeleniju skorostej. Holodilna tehnika i tehnologia. 2009. No. 6 (122). pp. 16—19 [in Russian].
  1. Kalinkevych M., Havrichenko I., Ignatenko V., Hontar O. Design of the axial-radial channels of turbocompressors. Inst. of Mechanical Engineers (IMechE). Int. Conf. on Compressors and their Systems. City University London, UK. Woodhead Publishing. 2009. pp. 227—236.
  2. Kalinkevych M.V., Shcherbakov O.N. Raschet techenij v bezlopatochnyh diffuzorah centrobezhnyh kompressorov. Kompressornoe i jenergeticheskoe mashinostroenie. Sumy. 2010. No. 3 (21). pp. 36—42 [in Russian].
  1. Kalinkevych M.V., Shcherbakov O.N. Jeksperimentalnoe issledovanie techenija gaza v bezlopatochnom diffuzore centrobezhnogo kompressora. Nauk. pracі DonNTU. Ser. gіrnicho-elektromehanіchna. 2011. Vol. 22(195). pp. 86—97 [in Russian].
  2. Kalinkevych M., Ihnatenko V., Shcherbakov O. Investigation of the Gas Flow in the Vaneless Diffusers of the Centrifugal Compressors. Inst. of Mechanical Engineers (IMechE). 7th Int. Conf. on Compressors and their Systems. City University London, UK. Woodhead Publishing. 2011. pp. 51—60. https://doi.org/10.1533/9780857095350.2.51
  3. Kalinkevych M. et al. The Design of Vaned Given Velocity Distribution. Inst. Of Mech. Engineers Diffusers of Centrifugal Compressors Based on the (IMechE). 7th Int. Conf. on Compressors and their Systems. City University London, UK. Woodhead Publishing. 2011. pp. 61—69. https://doi.org/10.1533/9780857095350.2.61
  4. Kalinkevych M.V., Skoryk A.V., Panenko V.G. Metodika proektirovanija i chislennoe issledovanie kanalnyh diffuzorov centrobezhnyh kompressorov. Kompressornoe i jenergeticheskoe mashinostroenie. 2012. No. 1 (27). pp. 15—21 [in Russian].
  1. Kalinkevych M.V., Shherbakov O.N. Chislennoe i jeksperimentalnoe issledovanie techeniia v bezlopatochnom diffuzore centrobezhnogo kompressora. Stalii rozvitok і shtuchnii holod. Zb. nauk. prac VIII Mіzhnarodnoi naukovo-tehnіchnoj konf. Herson: Grin D.S. 2012. pp. 364—369 [in Russian].
  2. Kalinkevych M.V., Skoryk A.V. Chislennoe issledovanie techenija gaza v vysokojeffektivnom kanalnom diffuzore centrobezhnogo kompressora. Holodilna tehnіka і tehnologіa. 2012. No. 4 (138). pp. 369—373 [in Russian].
  3. Kalinkevych M.V., Skoryk A.V. Jeksperimentalnoe issledovanie techenija gaza v kanalnom diffuzore centrobezhnogo kompressora. Kompressornoe i jenergeticheskoe mashinostroenie. 2013. No. 4 (34). pp. 26—30 [in Russian].
  4. Kalinkevych M., Skoryk A. Investigation of the channel diffuser of centrifugal compressor. Papers COMPRESSORS. Proceedings of the 8th Іnt. conf. on compressors and coolants. Papiernicka, Slovakia: SZ CHKT Rovinka. 2013. IIR series 2013-4.
  1. Kalinkevych M., Skoryk A. Flow and performance investigation of the specially designed channel diffuser of centrifugal compressor, Institution of Mechanical Engineers (IMechE). 8th Int. Conf. on Compressors and their Systems. City University London, UK. Woodhead Publishing. 2013. pp. 489—500.
  1. Kalinkevych M., Shcherbakov O., Ihnatenko V. Investigation of Gas Flow with Injection in Vaneless Diffuser of Centrifugal Compressor, Institution of Mechanical Engineers (IMechE). 8th Int. Conf. on Compressors and their Systems. City University London, UK. Woodhead Publishing. 2013. pp. 501—510.
  1. Kalinkevych M., Skoryk A. Design Method for Channel Diffusers of Centrifugal Compressors. Int. J. of Rotating Machinery. 2013. 7 p. https://doi.org/10.1155/2013/589357
  2. Kalinkevych M., Shcherbakov O. Numerical Modeling of the Flow in a Vaneless Diffuser of Centrifugal Compressor Stage. ISRN Mechanical Engineering. Hindawi Publishing Corporation. 2013. Vol. 2013. 9 p. https://doi.org/10.1155/2013/602384
  3. Kalinkevych M.V., Shherbakov O.N. Jeksperimentalnoe issledovanie vozdejstvija na pogranichnyj sloj v bezlopatochnom diffuzore centrobezhnogo kompressora. Kompressornoe i jenergeticheskoe mashinostroenie. 2014. No. 1 (35). pp. 11—15 [in Russian].
  4. Kalinkevych M.V., Skoryk A.V. Reshenie obratnoj zadachi gazodinamiki pri profilirovanii kanalnyh diffuzorov centrobezhnyh kompressorov. Trudy HVI mezhdunarodnoj nauchno-tehnicheskoj konf. po kompressorostroeniju. St. Petersburg, 2014. T. 1.pp. 279—288 [in Russian].
  1. Kalinkevych M., Obukhov O., Miroshnychenko A. Analysis of the gasdynamic performance of a vaned diffuser with given velocity distribution along the vane’s surfaces. IOP Conf. Series. Materials Science and Engineering. 9th Int. Conf. on Compressors and their Systems. City University London, UK. Institute of Physics Publishing. 2015. Vol. 90. https://doi.org/10.1088/1757-899X/90/1/012045
  2. Kalinkevych M.V., Shcherbakov O.N. Rasshirenie diapazona ustojchivoj raboty stupeni centrobezhnogo kompressora za schet vduva rabochej sredy v bezlopatochnom diffuzore. Vіsn. Nacіonalnogo tehnіchnogo unіversitetu ≪HPІ≫. Zb. nauk. prac. Ser. Energetichnі ta teplotehnіchnі procesy j ustatkuvannia. Harkіv: NTU ≪HPІ≫, 2015. pp. 118—125 [in Russian].
  1. Kalinkevych M., Ihnatenko V. Gazdynamic characteristics of the centrifugal compressor calculation. Holodilna tehnika i tehnologia. 2018. No. 4. pp. 4—11.
  1. Kalіnkevych M.V., Radchenko M.І. Zbіlshennja dіapazonu stіikoi roboti stupenja vіdcentrovogo kompresora z bezlopatkovim difuzorom. Aviacionno-kosmicheskaja tehnika i tehnologija. 2019. No. 6. pp. 4—9 [in Ukrainian].
  2. Kalіnkevych M.V. Difuzori vіdcentrovih kompresorіv. Sumy: Publishing House ≪University Book≫, 2020. 135 p. [in Ukrainian].
  3. Kampsti N. Ajerodinamika kompressorov / per.s angl. Moscow: Mir, 2000. 688 p. [in Russian].
  4. Kapel’kin D.A. Issledovanie potoka v kanalah lopatochnogo diffuzora centrobezhnogo kompressora. Leningradskij tehnologicheskij institut holodilnoj promyshlennosti. 1986. No. 6. pp. 16—19[in Russian].
  1. Kawaguchi B.T., Furuja V. The rotating flows in a vaneless diffuser having two parallel discs. Bull. of ASME. 1966. Vol. 9. 36 p.
  1. Kawanishi T., Tohbe Y., Kanazawa N. Investigations of the performance on vaned diffusers for low specific speed centrifugal compressor. Int. J. of Gas Turbine, Propulsion and Power Systems. 2014. Vol. 6. No. 1. pp. 9—16. https://doi.org/10.38036/jgpp.6.1_9
  2. Kim S., Park J., Baek J. A numerical study of the effects of blade angle distribution on the performance and loss generation of centrifugal compressor impellers. Proc. Inst. Mech. Eng. Part A. J. Power Energy. 2011. P. 226. https://doi.org/10.1177/0957650911429000
  3. Kline S.J., Johnston J.P. Diffusers — Flow Phenomena and Design Layers in Internal Flow— Performance Prediction. Advanced Topics in Turbomachinery Technology / Japikse D. (ed.). Concepts ETI Press. Wilder, 1986. VT.
  4. Korn G., Korn T. Spravochnik po matematike. 4-e izd. Moscow: Nauka, 1978. 831 p. [in Russian].
  5. Korshunov A.V., Strizhak L.Ja., Kulakov S.Yu. Metodika proektirovanija i ocenka jeffektivnosti obratno-napravljajushhego apparatov malorashodnyh stupenej centrobezhnyh kompressorov vysokogo davlenija. Kompressornaja tehnika i pnevmatika. 2006. No. 1. pp. 16—20 [in Russian].
  1. Krain H. A Study on Centrifugal Impeller and Diffuser Flow. ASME J. of Engineering for Power. 1981. Vol. 103. pp. 688—697. https://doi.org/10.1115/1.3230791
  1. Krasnov N.F., Koshevoj V.N., Kalugin V.T. Ajerodinamika otryvnyh techenij / pod red. N.F. Krasnova. Moscow: Vysshaja Shkola, 1988. 351 p. [in Russian].
  2. Landau L.D., Lifshic E.M. Teoreticheskaja fizika. Vol. VI. Gidrodinamika. Moscow: Nauka, 1988. 736 p. [in Russian].
  3. Lapin Ju.V. Statisticheskaja teorija turbulentnosti. Nauchno-tehnicheskie vedomosti. St. Petersburg, SGPU. 2004. No. 2. pp. 10—16 [in Russian].
  4. Lach V.G., Klimov L.A., Simonov A.M. Metod rascheta jelementov centrobezhnogo kompressora s primeneniem parametra nagruzki. Trudy LPI. 1972. No. 323 [in Russian].
  5. Livshic S.P. Ajerodinamika centrobezhnyh kompressornyh mashin. Moscow: Mashinostroenie, 1966. 340 p. [in Russian].
  6. Lojcjanskij L.G. Mehanika zhidkosti i gaza. Moscow: Nauka, 1978. 736 p. [in Russian].
  7. Lomakin A.A. Centrobezhnye i centrovye nasosy. Moscow: Mashinostroenie, 1966 [in Russian].
  8. Lopatochnyj diffuzor. Avtorske svіdoctvo 581325 SSSR. M.V. Kalinkevych, A.I. Apanasenko, K.P. Seleznev ta іnshі. 28 lipnja 1977.
  9. Loshkarev A.I. K voprosu o profilirovanii rabochego kolesa radialnoj turbomashiny. Izv. Vuzov. Ser. Mashinostroenie. 1960. No. 2. pp. 111—123 [in Russian].
  10. Mansour N.N., Kim J., Moin P.J. Reynolds-stress and dissipation rate budgets in a turbulent channel flow. Fluid Mech. 1988. Vol. 194. pp. 15—44. https://doi.org/10.1017/S0022112088002885
  11. Marconcini M., Rubechini F., Arnone A., Ibaraki S. Numerical Analysis of the Vaned Diffuser of a Transonic Centrifugal Compressor. ASME J. of Turbomachinery. 2010. 132(4)/041012. https://doi.org/10.1115/1.2988481
  12. Menter F.R. Multiscale Model for Turbulent Flows. In 24th Fluid Dynamic Conf. American Institute of Aeronautics and Astronautics. 1993. pp. 128—143.
  13. Menter F.R. Two-Equation Eddy-Viscosity Turbulence Models for Engineering Applications. AIAA J. 1994. Vol. 32. No. 8. pp. 42—53. https://doi.org/10.2514/3.12149
  14. Mingazov B.G., Davletshin I.S. Vybor modelej turbulentnosti i parametrov setki dlja rascheta techenij v diffuzornyh kanalah. Izv. vysshih uchebnyh zavedenij. Aviacionnaja tehnika. 2011. pp. 24—28 [in Russian].
  15. Nakane I., Ariga I., Hayata T., Uchida M. Experimental Investigation on Return Passage of Multi-Stage Compressor. JSME-B, 54(503). 1987. No. 87-1277A. pp. 1677—1684. https://doi.org/10.1299/kikaib.54.1677
  1. Nishida Y., Kobayashi H., Nishida H., Sugimura K. Performance Improvement of a Return Channel in a Multistage Centrifugal Compressor Using Multiobjective Optimization. J. Turbomach. 2013. 135(3). https://doi.org/10.1115/1.4007518
  2. Pfljajderer K. Lopatochnye mashiny dlja zhidkostej i gazov. Moscow: Mashgiz, 1960. 684 p. [in Russian].
  3. Pirumov U.G., Rosljakov G.S. Chislennye metody gazovoj dinamiki. Moscow: Vysshaja shkola. 1987. 232 p. [in Russian].
  1. Poljakov V.Ja. Vlijanie parametrov pogranichnogo sloja na raschetnyj profil bezotryvnogo bezlopatochnogo diffuzora. Trudy II Vsesojuznoj nauchno-tehnicheskoj konf. po kompressorostroeniju. Kyiv: Budіvelnik, 1970. pp. 203—214 [in Russian].
  1. Povh I.L. Tehnicheskaja gidrodinamika. Leningrad: Mashinostroenie, 1976. 504 p. [in Russian].
  2. Prandtl’ L. Teorija nesushhego kryla. Ch. I. Moscow—Leningrad: GNTI, 1931. 34 p. [in Russian].
  3. Prihod’ko A.A. Chislennoe modelirovanie techenij v reshetkah turbomashin s ispolzovaniem uravnenij Navier-Stokes. Matematicheskoe modelirovanie v mehanike zhidkosti i gaza. Dnepropetrovsk: DGU, 1992. pp. 77—84 [in Russian].
  4. Rekstin A.F., Galerkin Y.B. The primary design method development of centrifugal compressor impellers based on the analysis of the geometrical parameters. Oil Gas Eng. AIP Conf. Proc. 2019. 2141, 030052. https://doi.org/10.1063/1.5122102
  5. Remizov A.E., Karelin, I.O., Remizov O.A. K voprosu vybora parametra ocenki gazodinamicheskoj jeffektivnosti diffuzora. Aviacionno-Kosmicheskaja Tehnika i Tehnologija.
  6. No. 8 (105). pp. 91—97 [in Russian].
  7. Repik E.U., Sosedko Ju.P. Turbulentnyj pogranichnyj sloj. Metodika i rezultaty jeksperimentalnyh issledovanij. Moscow: FIZMATLIT, 2007. 312 p. [in Russian].
  8. Reutter O., Hildebrandt A., Raitor R., Jakiel C., Voss C. Automated Aerodynamic Optimization of a Return Channel Vane of a Multistage Radial Compressor. European Turbomachinery Conf. 9. 2011. 45.
  1. Rid R., Shervud T., Prausnic J. Svojstva gazov i zhidkostej. Leningrad: Himija, 1982. 592 p. [in Russian].
  2. Ris V.F. Centrobezhnye kompressornye mashiny. Leningrad: Mashinostroenie, 1981. 351 p. [in Russian].
  3. Rube C., Rossbach T., Wedeking M., Grates D.R., Jeschke P. Experimental and Numerical Investigation of the Flow Inside the Return Channel of a Centrifugal Process Compressor. Proceedings of the Turbine Technical Conf. and Exposition. Montreal, ON, Canada. 2015. Vol. 138. p. 101006-1.
  1. Rusanov A.V., Ershov S.V. Problemy chislennogo modelirovanija trehmernyh vjazkih techenij v osevyh i centrobezhnyh kompressorah. Kompressornaja tehnika i pnevmatika. Sumy, 2004. pp. 108—117 [in Russian].
  2. Samarskij A.A., Popov Ju.P. Raznostnye metody reshenija zadach gazovoj dinamiki. Moscow: Nauka, 1980. 352 p. [in Russian].
  3. Samojlovich G.S. Gidrogazodinamika. Moscow: Mashinostroenie, 1990. 384 p. [in Russian].
  4. Sedov L.I. Mehanika sploshnoj sredy. Moscow: Nauka, 1983. T.1. 528 p.; T.2. 560 p. [in Russian].
  1. Seleznev K.P., Galerkin Ju.B., Nuzhdin A.C. Vlijanie formy profilja bezlopatochnogo diffuzora na jeffektivnost raboty centrobezhnoj kompressornoj stupeni. Trudy II Vsesojuznoj nauch.-tehn. konf. po kompressorostroeniju. Kyiv: Budіvelnik, 1970. pp. 203—214 [in Russian].
  1. Seleznev K.P., Galerkin Ju.B. Centrobezhnye kompressory. Leningrad: Mashinostroenie, 271 p. [in Russian].
  2. Seleznev K.P., Galerkin Ju.B. et al. Teorija i raschet turbokompressorov. Leningrad: Mashinostroenie, 1986. 392 p. [in Russian].
  1. Senoo Y., Kinoshita Y., Ishida M. Asymmetric flow in vaneless diffusers of centrifugal blowers. ASME J. Fluids Eng. 1977. Vol. 99. pp. 104—114. https://doi.org/10.1115/1.3448501
  2. Senoo Y., Kinoshita Y. Limits of Rotating Stall and Stall in Vaneless Diffusers of Centrifugal Compressors. ASME Paper. 1978. No. 78- GT-19. https://doi.org/10.1115/78-GT-19
  3. Sherstjuk A.N., Sokolov A.I. Meridionalnoe profilirovanie bezlopatochnyh diffuzorov. Teplojenergetika. 1966. No. 2 [in Russian].
  1. Sherstjuk A.N., Kosmin V.M. O vlijanii naklona stenok bezlopatochnogo diffuzora na harakteristiki oseradialnogo kompressora. Teplojenergetika. 1969. No. 8. pp. 77—80 [in Russian].
  2. Sherstjuk A.N. Turbulentnyj pogranichnyj sloj. Moscow: Jenergija, 1974. 272 p. [in Russian].
  3. Shibata T., Yagi M., Nishida H., Kobayashi H., Tanaka M. Effect of Impeller Blade Loading on Compressor Stage Performance in High Specific Speed Range. Proceedings of ASME Turbo Expo. Glasgow, UK. ASME Paper. 2010. No. GT2010-22281.
  1. Shlihting G. Teorija pogranichnogo sloja. Moscow: Nauka, 1969. 711 p. [in Russian].
  2. Shum Y.K.P., Tan C.S., Cumpsty N.A. Impeller-Diffuser Interaction in a Centrifugal Compressor. J. of Turbomachinery. 2000. No. 4. pp. 777—786.
  1. Skoch G.J. Experimental Investigation of Centrifugal Compressor Stabilization Techniques. ASME J. Turbomachinery. 2003. Vol. 125. pp. 704—713. https://doi.org/10.1115/1.1624846
  2. Skorohodova T.N. Raschet i issledovanie bezotryvnogo bezlopatochnogo diffuzora centrobezhnoj kompressornoj stupeni. Jenergomashinostroenie. 1966. No. 2. pp. 10—12 [in Russian].
  1. Smirnov P., Hansen T., Menter F. Chislennoe modelirovanie techenija v centrobezhnom kompressore. ANSYS Solutions, Russkaja redakcija. Inzhenerno-tehnicheskij zhurnal. 2007. No. 5. pp. 22—27 [in Russian].
  1. Spakovszky Z.S., Weigle H.J., Paduano J.D. et al. Rotating Stall Control in a High-Speed Stage with Inlet Distortion. Part I. Radial Distortion. ASME J. Turbomachinery. 1999. Vol. 121. pp. 510—516. https://doi.org/10.1115/1.2841345
  2. Stanitz J.D. One-Dimensional Compressible Flow in Vaneless Diffusers of Radial or Mixed-Flow Centrifugal Compressors, Including Effects of Friction, Heat Transfer and Area Change. 1952. NACA TN 2610.
  3. Stanitz J.D. Design of two-dimensional channels with prescribed velocity distributions along the channel walls. Report 1115 National advisory committee for aeronautics. Supersedes NACA TN 2593, I — Relaxation solutions and NACA TN 2595, II — Solution by Green’s function. 1952. pp. 153—192.
  4. Stein A., Niazi S.L., Sankar N. Computational Analysis of Stall and Separation Control in Centrifugal Compressors. J. of Propulsion and Power. 2000. Vol. 16(1). pp. 65—71. https://doi.org/10.2514/2.5532
  5. Stepanov G.Yu. Gidrodinamika reshetok turbomashin. Moscow: Fizmatgiz, 1962. 512 p. [in Russian].
  6. Stepanov G.Yu. Postroenie ploskih kanalov i reshetok turbomashin s bezotryvnym techeniem Izv. RAN. MZhG. 1993. No. 4. pp. 30—42 [in Russian].
  7. Stoljarskij M.T., Zhuravleva V.M., Poljakov V.Ja. O racionalnom tipe bezlopatochnogo diffuzora dlja centrobezhnyh nagnetatelej transporta prirodnogo gaza. Trudy III VNTK po kompressorostroeniju. Kazan: Kazankompressormash, 1974. pp.195—204 [in Russian].
  1. Stoljarskij M.T. Sposob unifikacii obratnogo napravljajushhego apparata v romezhutochnoj stupeni CKM. Jenergomashinostroenie. 1981. No. 6. pp. 18—20 [in Russian].
  1. Stratford B.S. The prediction of separation of the turbulent boundary layer. J. Fluid Mech. 1959. Vol. 5 (1). pp. 1—16. https://doi.org/10.1017/S0022112059000015
  2. Stratford B.S. An experimental flow with zero skin friction throughout its region of pressure rise. J. Fluid Mech. 1959. Vol. 5 (1). pp. 17—35. https://doi.org/10.1017/S0022112059000027
  3. Strizhak L.Ja., Suslina I.P. Issledovanie bezlopatochnyh diffuzorov. Trudy nauchnoj shkoly kompressorostroenija SPbGPU: sbornik referativnyh statej po publikacijam I rabotam osnovatelja nauchnoj shkoly professora K.P. Selezneva i ego uchenikov, biograficheskih ocherkov i vospominanij kolleg i drugih informacionnyh materialov. St. Petersburg: Izd-vo Politehn. Un-ta. 2010. pp. 149—163 [in Russian].
  1. Suna Z., Zheng X., Kawakubo T. Experimental Investigation of Instability Inducement and Mechanism of Centrifugal Compressors with Vaned Diffuse. Applied Thermal Engineering. 2018. Vol. 133. pp. 464—471. https://doi.org/10.1016/j.applthermaleng.2018.01.071
  2. Tanaka M., Kobayashi H., Nishida H. Development of Wedge Type Impeller for Low Specific Speed Centrifugal Compressor. Proceedings of IMECE. 2008. Boston, MA. https://doi.org/10.1115/IMECE2008-66571
  3. Teoreticheskie osnovy teplotehniki. Teplotehnicheskij jeksperiment. Moscow: Jenergoatomizdat, 1988. 560 p. [in Russian].
  4. Townsend A.A. The development of turbulent boundary layers with negligible wall stress. Cambridge University Press. 1959. pp. 143—155.
  5. Trehmernye turbulentnye pogranichnye sloi (3D turbulent boundary layers) / pod red. H. Fernhol’ca, E. Krauze. Moscow: Mir, 1985. 84 p. [in Russian].
  1. Turton R.K. Principles of turbomachinery. 1995. 265 p.
  2. Veress A., Van Den Braembussche. Inverse Design and Optimization of a Return Channel for a Multistage Centrifugal Compressor. ASME J. Fluids Eng. 2004. Vol. 126(5). pp. 799—806. https://doi.org/10.1115/1.1792258
  3. Vjachkilev O.A. Analiticheskoe opisanie formy centrobezhnyh rabochih koles s prostranstvennymi lopatkami. Proektirovanie i issledovanie kompressornyh mashin. Kazan: KHTI SKBK, 1982. pp. 65—72 [in Russian].
  4. Wang P., Ruan, X., Zou J., Fu X. Medial Axis Transform Method for Shape Design of Hub and Shroud Contours of Impellers. J. Fluids Eng. 2011. Vol. 133. 034502. https://doi.org/10.1115/1.4003689
  5. Wilcox D.C. Turbulence Modeling for CFD. California: DCV Industries, 1994.
  6. Xu C.C., Amano R.S. The Development of Centrifugal Compressor Impeller. ASME Turbo Expo. Power Land Sea Air. 2008. Vol. 7. pp. 539—544. https://doi.org/10.1115/GT2008-50200
  7. Yagi M., Kishibe T., Shibata T., Nishida H., Kobayashi H. Performance Improvement of Centrifugal Compressor Impellers by Optimizing Blade-Loading Distribution. Proceedings of ASME Turbo Expo. 2008. Berlin. ASME Paper No. GT2008-51025. https://doi.org/10.1115/GT2008-51025
  8. Yagi M., Nishioka T., Kobayashi H., Nishida H., Yamamoto S. Effects of return channel with splitter vanes on performance of multistage centrifugal compressor. Proceedings of the Turbine Technical Conf. and Exposition GT2015. 2015. Montreal. QC. Canada. https://doi.org/10.1115/GT2015-42442
  9. Yutaka O., Okutsu Y., Goto T., Outa E. Aerodynamic Performance and Noise Characteristics of a Centrifugal Compressor with Modified Vaned Diffusers. J. of Thermal Science. 2006.Vol. 15. No 4. pp. 289—295. https://doi.org/10.1007/s11630-006-0289-y
  10. Yutaka O., Goto T., Outa E. Effects of Tapered Diffuser Vane on the Flow Field and Noise of a Centrifugal Compressor. J. of Thermal Science. 2007. Vol. 16. No. pp. 301—308. https://doi.org/10.1007/s11630-007-0301-1
  11. Zhukovskij M.I. Raschet obtekanija proizvolnoj reshetki profilej i postroenie reshetok po zadavaemomu raspredeleniju skorostej. Ajerodinamika. SPb CKTI. 1954. No. 27[in Russian].
  12. Zvanec B.A., Solteev P.V., Cukerman S.V. Issledovanie centrobezhnoj kompressornoj stupeni s razlichnoj formoj srednej linii lopatok diffuzora. Himicheskoe i neftjanoe mashinostroenie. 1989. No. 5. pp. 13—14 [in Russian].

Related Post

Books Scientific monographs

Mazepiana in museum collections and private collections in Ukraine

Books Scientific monographs

Resonators with inhomogeneities for measuring the dielectric permittivity of media

Books Scientific monographs

Management of Natural Assets Based on Blue Growth